# NX-OS 9300v text replies for the commands arpnip sends (pty). The ARP rows
# are the lab capture's "show ip arp vrf all" rows (header lines are removed by
# the | inc filter). Synthetic: the IPv6 section, which joins the capture's
# per-VRF "show ipv6 neighbor" tables, since "vrf all" was not captured.
#prompt: switch# 
#--- show ip arp vrf all | inc ^[1-9] | no-more
172.20.20.1     00:00:04  92f9.ea9d.aeda  mgmt0                   
10.10.10.2      00:00:57  0200.0000.0201  Ethernet1/1             
10.10.10.2      00:00:52  0200.0000.0202  Ethernet1/2             
10.11.0.2       00:00:45  0200.0000.0203  Ethernet1/3             
10.12.0.2       00:00:45  0200.0000.0203  Ethernet1/4             
#--- show ipv6 neighbor vrf all | exclude Flags: | no-more

IPv6 Adjacency Table for VRF red
Total number of entries: 3
Address         Age       MAC Address     Pref Source     Interface         Mobility Flags
2001:db8:10::2  00:06:06  0200.0000.0201  50   icmpv6     Ethernet1/1                      
2001:db8:10::ff:fe00:201
                00:06:05  0200.0000.0201  50   icmpv6     Ethernet1/1                      
fe80::2         00:06:04  0200.0000.0201  50   icmpv6     Ethernet1/1                      

IPv6 Adjacency Table for VRF green
Total number of entries: 2
Address         Age       MAC Address     Pref Source     Interface         Mobility Flags
2001:db8:13::2  00:06:04  0200.0000.0204  50   icmpv6     Ethernet1/5                      
2001:db8:13::ff:fe00:204
                00:06:03  0200.0000.0204  50   icmpv6     Ethernet1/5                      
